For decades there seemed to be only 1 dependable solution to keep info on your computer – with a hard disk drive (HDD). However, this kind of technology is actually showing it’s age – hard drives are noisy and slow; they’re power–hungry and are likely to generate quite a lot of warmth for the duration of intensive procedures.
SSD drives, on the other hand, are quick, consume much less energy and tend to be far less hot. They furnish a new way of file accessibility and data storage and are years in front of HDDs relating to file read/write speed, I/O performance and also energy efficiency. Observe how HDDs stand up up against the modern SSD drives.
1. Access Time
Due to a radical new approach to disk drive performance, SSD drives permit for faster file access rates. Having an SSD, data file access instances tend to be lower (under 0.1 millisecond).
HDD drives continue to take advantage of the same general data access concept that’s originally developed in the 1950s. Even though it has been vastly improved since that time, it’s slow as compared with what SSDs are providing. HDD drives’ data access speed ranges somewhere between 5 and 8 milliseconds.
2. Random I/O Performance
Due to the unique radical data file storage method incorporated by SSDs, they feature swifter file access speeds and swifter random I/O performance.
In the course of My Web Design Host’s lab tests, all of the SSDs demonstrated their ability to take care of a minimum of 6000 IO’s per second.
With a HDD drive, the I/O performance gradually increases the more you use the hard drive. Nevertheless, just after it gets to a certain limit, it can’t go swifter. And due to the now–old technology, that I/O limit is significantly below what you can find with a SSD.
HDD are only able to go as much as 400 IO’s per second.
The lack of moving elements and rotating disks inside SSD drives, as well as the latest developments in electric interface technology have led to a significantly safer file storage device, having an normal failure rate of 0.5%.
With an HDD drive to work, it should rotate two metal disks at over 7200 rpm, keeping them magnetically stable in the air. There is a wide range of moving parts, motors, magnets and also other gadgets packed in a small place. Therefore it’s no wonder that the standard rate of failure of the HDD drive ranges between 2% and 5%.
4. Energy Conservation
SSD drives operate nearly noiselessly; they don’t create excess heat; they don’t mandate added chilling alternatives and consume far less electricity.
Tests have demonstrated that the normal electrical power usage of an SSD drive is between 2 and 5 watts.
HDD drives are famous for being loud. They need extra electrical power for cooling reasons. Within a server that has several HDDs running at all times, you will need a lot of fans to keep them kept cool – this may cause them a lot less energy–economical than SSD drives.
HDDs use up somewhere between 6 and 15 watts.
5. CPU Power
SSD drives allow for a lot quicker data file accessibility rates, which will, in turn, enable the CPU to accomplish data calls much faster and to go back to different tasks.
The common I/O wait for SSD drives is 1%.
By using an HDD, you’ll have to dedicate additional time watching for the outcomes of one’s data call. It means that the CPU will stay idle for much more time, awaiting the HDD to react.
The normal I/O delay for HDD drives is approximately 7%.
6.Input/Output Request Times
The bulk of My Web Design Host’s new machines now use exclusively SSD drives. Our very own lab tests have demostrated that with an SSD, the normal service time for an I/O request whilst performing a backup remains below 20 ms.
All through the same lab tests sticking with the same server, this time fitted out with HDDs, general performance was much slow. During the server backup process, the normal service time for any I/O demands varied somewhere between 400 and 500 ms.
7. Backup Rates
You’re able to feel the real–world potential benefits to utilizing SSD drives every day. For instance, with a web server furnished with SSD drives, a complete backup can take just 6 hours.
We applied HDDs mainly for a few years and we’ve decent comprehension of just how an HDD runs. Backing up a server designed with HDD drives will take around 20 to 24 hours.
With My Web Design Host, you may get SSD–driven hosting services at competitive prices. The cloud plans include SSD drives by default. Go in for an account with My Web Design Host and watch the way your sites can become better immediately.
- Live Demo
- Each one of our Virtual Private Servers is setup for you 100% free. 99.9% network uptime. Full root access to the server.
Compare our prices
- Find out more about our prices and pick the right Virtual Private Server for your active sites. You’re able to upgrade to a more feature–rich VPS Hosting plan with just a mouse click.
- Compare our hosting plans
- We are online for you day and night to answer any inquiries concerning our VPS Hosting services. 60–min response time guarantee.